WEG 00318ES1DFD184T-W22 (3 HP Electric Motor) 182/4T Frame, 1Ph 230 V 60 Hz, 1745 RPM – TEFC – Foot-mounted

3 Horsepower, Cast Iron Series, TEFC Foot Mounted, 184T Frame ,230 Volt-1 Phase, RPM 1745

CALL FOR PRICING

SKU WEG-31068 Categories ,

FEATURES

Standard NEMA MG-1
Frequency 60 Hz
Voltage 230 V
Number of poles 4
Degree of Protection IP55
Synchronous speed 1800 rpm
Output rating 3 HP
Mounting Foot-mounted
Flange Without
Mounting F-1
Terminal box¹ Left position
Enclosure IC411 – TEFC

SPECIFICATIONS

Electric Motors

Frame 182/4T
Output 3 HP (2.2 kW)
Number of Poles 4
Frequency 60 Hz
Rated speed 1745 rpm
Slip 3.06 %
Rated voltage 230 V
Rated current 13.8 A
L. R. Amperes 106 A
LRC 7.7x(Code K)
No load current 6.70 A
Rated torque 9.03 ft.lb
Locked rotor torque 290 %
Breakdown torque 270 %
Locked rotor time 14s (cold) 8s (hot)
Moment of inertia (J) 0.3735 sq.ft.lb
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 – TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 60.0 dB(A)
Approx. weight³ 106 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
65.0 74.0 77.0

Power factor

50% 75% 100%
0.79 0.87 0.90

Features

Frame Material Cast Iron
Impregnation Method Dip and Bake Polyester
Main terminal box hole NPT 1″
Terminal Block Without
Shaft Locking Device Without
Drain Rubber, automatic
Shaft Material SAE 1040/45 Carbon Steel
Painting RAL 3003 207A (ISO 12944 – C2)
Grounding Lugs Single
Fan Cover material Steel
Tropicalized Painting Without
Fan material Plastic
Bearing cap No-Without Bearing Cap
Drip Cover Without
Overload protector (phenolic) Manual

DOCUMENTS

weg-00318ES1DFD184T-W22-data-sheet

weg-00318ES1DFD184T-W22-drawings

weg-00318ES1DFD184T-W22-nameplate

WARRANTY